ABSTRACT
Background@#Techniques to accelerate tooth movement have been a topic of interest in orthodontics over the past decade. As orthodontic treatment time is linked to potential detrimental effects, such as increased decalcification, dental caries, root resorption, and gingival inflammation, the possibility of reducing treatment time in orthodontics may provide multiple benefits to the patient. Another reason for the surge in interest in accelerated tooth movement has been the increased interest in adult orthodontics.ReviewThis review summarizes the different methods for surgical acceleration of orthodontic tooth movement. It also describes the advantages and limitations of these techniques, including guidance for future investigations. @*Conclusions@#Optimization of the described techniques is still required, but some of the techniques appear to offer the potential for accelerating orthodontic tooth movement and improving outcomes in well-selected cases.
ABSTRACT
Background@#Mesenchymal stem cell (MSC) therapy gained interest among scientists following the discovery of its therapeutic potential. However, their clinical use has been hindered due to their immunogenicity and tumorigenicity. Relatively recently, it has been unveiled that the mechanism by which MSC promote healing is by secreting exosomes. This raised the interest in developing cell-free therapy, avoiding the obstacles that deterred the translation of MSC therapy into clinical practice.ReviewThis comprehensive narrative review summarises the current understanding of exosome biogenesis and content. Moreover, the existing research on exosome use in bone tissue engineering is discussed. @*Conclusions@#Exosome-based therapy may provide excellent potential in the field of bone tissue engineering and craniofacial reconstructive surgery. Further investigation is required before the technology can be translated into clinical practice.
ABSTRACT
Background@#Bone grafting has been considered the gold standard for hard tissue reconstructive surgery and is widely used for large mandibular defect reconstruction. However, the midface encompasses delicate structures that are surrounded by a complex bone architecture, which makes bone grafting using traditional methods very challenging. Three-dimensional (3D) bioprinting is a developing technology that is derived from the evolution of additive manufacturing. It enables precise development of a scaffold from different available biomaterials that mimic the shape, size, and dimension of a defect without relying only on the surgeon’s skills and capabilities, and subsequently, may enhance surgical outcomes and, in turn, patient satisfaction and quality of life.ReviewThis review summarizes different biomaterial classes that can be used in 3D bioprinters as bioinks to fabricate bone scaffolds, including polymers, bioceramics, and composites. It also describes the advantages and limitations of the three currently used 3D bioprinting technologies: inkjet bioprinting, micro-extrusion, and laser-assisted bioprinting. @*Conclusions@#Although 3D bioprinting technology is still in its infancy and requires further development and optimization both in biomaterials and techniques, it offers great promise and potential for facial reconstruction with improved outcome.
ABSTRACT
Background@#The human mandible is variable in shape, size and position and any deviation from normal can affect the facial appearance and dental occlusion. @*Objectives@#The objectives of this study were to determine whether the Sassouni cephalometric analysis could help predict two-dimensional mandibular shape in humans using cephalometric planes and landmarks. @*Materials and methods@#A retrospective computerised analysis of 100 lateral cephalometric radiographs taken at Kingston Hospital Orthodontic Department was carried out. @*Results@# @*Results@#showed that the Euclidean straight-line mean difference between the estimated position of gonion and traced position of gonion was 7.89 mm and the Euclidean straight-line mean difference between the estimated position of pogonion and the traced position of pogonion was 11.15 mm. The length of the anterior cranial base as measured by sella-nasion was positively correlated with the length of the mandibular body gonion-menton, r = 0.381 and regression analysis showed the length of the anterior cranial base sella-nasion could be predictive of the length of the mandibular body gonion-menton by the equation 22.65 + 0.5426x, where x = length of the anterior cranial base (SN). There was a significant association with convex shaped palates and oblique shaped mandibles, p = 0.0004. @*Conclusions@#The method described in this study can be used to help estimate the position of cephalometric points gonion and pogonion and thereby sagittal mandibular length. This method is more accurate in skeletal class I cases and therefore has potential applications in craniofacial anthropology and the ‘missing mandible’ problem in forensic and archaeological reconstruction.
ABSTRACT
Background@#Bone grafting has been considered the gold standard for hard tissue reconstructive surgery and is widely used for large mandibular defect reconstruction. However, the midface encompasses delicate structures that are surrounded by a complex bone architecture, which makes bone grafting using traditional methods very challenging. Three-dimensional (3D) bioprinting is a developing technology that is derived from the evolution of additive manufacturing. It enables precise development of a scaffold from different available biomaterials that mimic the shape, size, and dimension of a defect without relying only on the surgeon’s skills and capabilities, and subsequently, may enhance surgical outcomes and, in turn, patient satisfaction and quality of life.ReviewThis review summarizes different biomaterial classes that can be used in 3D bioprinters as bioinks to fabricate bone scaffolds, including polymers, bioceramics, and composites. It also describes the advantages and limitations of the three currently used 3D bioprinting technologies: inkjet bioprinting, micro-extrusion, and laser-assisted bioprinting. @*Conclusions@#Although 3D bioprinting technology is still in its infancy and requires further development and optimization both in biomaterials and techniques, it offers great promise and potential for facial reconstruction with improved outcome.
ABSTRACT
Background@#The human mandible is variable in shape, size and position and any deviation from normal can affect the facial appearance and dental occlusion. @*Objectives@#The objectives of this study were to determine whether the Sassouni cephalometric analysis could help predict two-dimensional mandibular shape in humans using cephalometric planes and landmarks. @*Materials and methods@#A retrospective computerised analysis of 100 lateral cephalometric radiographs taken at Kingston Hospital Orthodontic Department was carried out. @*Results@# @*Results@#showed that the Euclidean straight-line mean difference between the estimated position of gonion and traced position of gonion was 7.89 mm and the Euclidean straight-line mean difference between the estimated position of pogonion and the traced position of pogonion was 11.15 mm. The length of the anterior cranial base as measured by sella-nasion was positively correlated with the length of the mandibular body gonion-menton, r = 0.381 and regression analysis showed the length of the anterior cranial base sella-nasion could be predictive of the length of the mandibular body gonion-menton by the equation 22.65 + 0.5426x, where x = length of the anterior cranial base (SN). There was a significant association with convex shaped palates and oblique shaped mandibles, p = 0.0004. @*Conclusions@#The method described in this study can be used to help estimate the position of cephalometric points gonion and pogonion and thereby sagittal mandibular length. This method is more accurate in skeletal class I cases and therefore has potential applications in craniofacial anthropology and the ‘missing mandible’ problem in forensic and archaeological reconstruction.
ABSTRACT
BACKGROUND: There is no normative craniofacial anthropometric data for the Kenyan-African population. The purpose of this investigation was to determine normative anthropometric craniofacial measurements and proportional relationships for Kenyans of African descent and to compare the data with African Americans (AA), North American Whites (NAW), and neoclassical canons. METHODS: Twenty-five direct facial anthropometric measurements, and 4 angular measurements, were taken on 72 Kenyan-African participants (age range 18–30 years) recruited at the University of Nairobi in Kenya. The data were compared with AA and NAW populations, and neoclassical canons. Descriptive statistics of the variables were computed for the study population. RESULTS: Significant differences between both Kenyan males and females were detected in forehead height (~ 5 mm greater for males, ~ 4.5 mm for females), nasal height (reduced by ~ 4 mm in males, ~ 3 mm in females), nasal width (8–9 mm greater), upper lip height (> 3 mm), and eye width (greater by ~ 3 mm) compared to NAW subjects. All vertical measurements obtained were significantly different compared with NAW. Differences were observed in comparison with AA subjects, but less marked. Mouth width was similar in all groups. Angular measurements were variable. Neoclassical canons did not apply to the Kenyan population. CONCLUSIONS: Anthropometric measurements of NAW showed clear differences when compared with the Kenyan population, and variations exist with comparative AA data. The anthropometric data in terms of linear measurements, angular measurements, and proportional values described may serve as a database for facial analysis in the Kenyan-African population.
Subject(s)
Female , Humans , Male , Black or African American , Anthropometry , Forehead , Kenya , Lip , MouthABSTRACT
BACKGROUND: In the absence of clear guidelines for facial aesthetic surgery, most surgeons rely on expert intuitive judgement when planning aesthetic and reconstructive surgery. One of the most famous theories regarding “ideal” facial proportions is that of the golden proportion. However, there are conflicting opinions as to whether it can be used to assess facial attractiveness. The aim of this investigation was to assess facial ratios of professional black models and to compare the ratios with the golden proportion. METHODS: Forty photographs of male and female professional black models were collected. Observers were asked to assign a score from 1 to 10 (1 = not very attractive, 10 = very attractive). A total of 287 responses were analysed for grading behaviour according to various demographic factors by two groups of observers. The best graded photographs were compared with the least well-graded photographs to identify any differences in their facial ratios. The models’ facial ratios were calculated and compared with the golden proportion. RESULTS: Differences in grading behaviour were observed amongst the two assessment groups. Only one out of the 12 facial ratios was not significantly different from the golden proportion. CONCLUSIONS: Only one facial ratio was observed to be similar to the golden proportion in professional model facial photographs. No correlation was found between facial ratios in professional black models with the golden proportion. It is proposed that an individualistic treatment for each ratio is a rather better method to guide future practice.
Subject(s)
Female , Humans , Male , Beauty , Demography , Methods , SurgeonsABSTRACT
BACKGROUND@#Treatment planning the correction of a transverse maxillary occlusal plane cant often involves a degree of qualitative “eyeballingâ€, with the attendant possibility of error in the estimated judgement. A simple chair side technique permits quantification of the extent of asymmetry and thereby quantitative measurements for the correction of the occlusal plane cant.@*METHODS@#A measuring instrument may be constructed by soldering the edge of a stainless steel dental ruler at 90° to the flat surface of a similar ruler. With the patient either standing in natural head position, or alternatively seated upright in the dental chair, and a dental photographic retractor in situ, the flat under-surface of the horizontal part of this measuring instrument is placed on a unilateral segment of a bilateral structure, e.g. the higher maxillary canine orthodontic bracket hook. The vertical ruler is held next to the contralateral canine tooth, and the vertical distance measured directly from the canine bracket to the flat under-surface of the horizontal part of the measuring instrument.@*RESULTS@#This vertical distance quantifies the overall extent of movement required to level the maxillary occlusal plane.@*CONCLUSIONS@#This measuring instrument and simple chair side technique helps to quantify the overall extent of surgical levelling required and may be a useful additional technique in our clinical diagnostic armamentarium.
ABSTRACT
BACKGROUND@#To test the hypothesis that in profile smiling view, for ideal aesthetics, a tangent to the labial face of the maxillary central incisor crowns should be approximately parallel to the true vertical line and thereby perpendicular to the true horizontal line.@*METHODS@#An idealized female image was created with computer software and manipulated using the same software to construct an “ideal†female profile image with proportions, and linear and angular soft tissue measurements, based on currently accepted criteria for idealized Caucasian profiles. The maxillary incisor labial face tangent was altered in 5° increments from 70 to 120°, creating a range of images, shown in random order to 70 observers (56 lay people and 14 clinicians), who ranked the images from the most to the least attractive. The main outcome was the preference ranks of image attractiveness given by the observers.@*RESULTS@#The most attractive inclination of a tangent to the labial face of the maxillary incisor crowns in profile view in relation to the true horizontal line was 85°, i.e. 5° retroclined from a perpendicular 90° inclination. The most attractive range appears to be between 80 and 90°. Excessive proclination appeared to be less desirable than retroclination. Beyond 105° most observers recommend treatment.@*CONCLUSION@#In natural head position, the ideal inclination of the maxillary incisor crown labial face tangent in profile view will be approximately parallel to the true vertical line and thereby approximately perpendicular to the true horizontal line.
ABSTRACT
BACKGROUND: This study is a quantitative evaluation of the influence of the mentolabial angle on perceived attractiveness and threshold values of desire for surgery. METHODS: The mentolabial angle of an idealized silhouette male Caucasian profile image was altered incrementally between 84° and 162°. Images were rated on a Likert scale by pretreatment orthognathic patients (n = 75), lay people (n = 75) and clinicians (n = 35). RESULTS: A mentolabial angle of approximately 107° to 118° was deemed the most attractive, with a range of up to 140° deemed acceptable. Angles above or below this range were perceived as unattractive, and anything outside the range of below 98° or above 162° was deemed very unattractive. A deep mentolabial angle (84°) or an almost flat angle (162°) was deemed the least attractive. In terms of threshold values of desire for surgery, for all groups, a threshold value of ≥162° and ≤84° indicated a preference for surgery, although clinicians were least likely to suggest surgery. The clinician group was the most consistent, and for many of the images, there was some variation in agreement between clinicians and lay people as to whether surgery is required. There was even more variability in the assessments for the patient group. CONCLUSIONS: It is recommended that in orthognathic and genioplasty planning, the range of normal variability of the mentolabial angle, in terms of observer acceptance, is taken into account as well as threshold values of desire for surgery. The importance of using patients as observers in attractiveness research is stressed.
Subject(s)
Humans , Male , Esthetics , Evaluation Studies as Topic , GenioplastyABSTRACT
BACKGROUND: The aim of this study is to validate a new three-dimensional craniofacial stereophotogrammetry imaging system (3dMDface) through comparison with manual facial surface anthropometry. The null hypothesis was that there is no difference between craniofacial measurements using anthropometry vs. the 3dMDface system. METHODS: Facial images using the new 3dMDface system were taken from six randomly selected subjects, sitting in natural head position, on six separate occasions each 1 week apart, repeated twice at each sitting. Exclusion criteria were excess facial hair, facial piercings and undergoing current dentofacial treatment. 3dMDvultus software allowed facial landmarks to be marked and measurements recorded. The same measurements were taken using manual anthropometry, using soluble eyeliner to pinpoint landmarks, and sliding and spreading callipers and measuring tape to measure distances. The setting for the investigation was a dental teaching hospital and regional (secondary and tertiary care) cleft centre. The main outcome measure was comparison of the craniofacial measurements using the two aforementioned techniques. RESULTS: The results showed good agreement between craniofacial measurements using the 3dMDface system compared with manual anthropometry. For all measurements, except chin height and labial fissure width, there was a greater variability with the manual method compared to 3D assessment. Overall, there was a significantly greater variability in manual compared with 3D assessments (p < 0.02). CONCLUSIONS: The 3dMDface system is validated for craniofacial measurements.
Subject(s)
Anthropometry , Chin , Hair , Head , Hospitals, Teaching , Imaging, Three-Dimensional , Methods , Outcome Assessment, Health Care , PhotogrammetryABSTRACT
BACKGROUND: This case report discusses the unusual presentation of limited mouth opening as a result of bilateral coronoid process hyperplasia. CASE PRESENTATION: A 14.5-year-old male patient of white Caucasian ethnicity presented with limited mouth opening, mandibular asymmetry, and dental crowding. Investigations confirmed bilateral coronoid process hyperplasia and management involved bilateral intraoral coronoidectomy surgery under general anaesthesia, followed by muscular rehabilitation. Mouth opening was restored to average maximum opening within 4 months of surgery. CONCLUSION: Limited mouth opening is a common presentation to medical and dental professionals. The rare but feasible diagnosis of coronoid impingement syndrome should not be overlooked.
Subject(s)
Humans , Male , Diagnosis , Hyperplasia , Malocclusion , Mouth , RehabilitationABSTRACT
OBJECTIVE: To evaluate the relative importance of bilabial prominence in relation to other facial profile parameters in a normal population. METHODS: Profile stimulus images of 38 individuals (28 female and 10 male; ages 19-25 years) were shown to an unrelated group of first-year students (n = 42; ages 18-24 years). The images were individually viewed on a 17-inch monitor. The observers received standardized instructions before viewing. A six-question questionnaire was completed using a Likert-type scale. The responses were analyzed by ordered logistic regression to identify associations between profile characteristics and observer preferences. The Bayesian Information Criterion was used to select variables that explained observer preferences most accurately. RESULTS: Nasal, bilabial, and chin prominences; the nasofrontal angle; and lip curls had the greatest effect on overall profile attractiveness perceptions. The lip-chin-throat angle and upper lip curl had the greatest effect on forehead prominence perceptions. The bilabial prominence, nasolabial angle (particularly the lower component), and mentolabial angle had the greatest effect on nasal prominence perceptions. The bilabial prominence, nasolabial angle, chin prominence, and submental length had the greatest effect on lip prominence perceptions. The bilabial prominence, nasolabial angle, mentolabial angle, and submental length had the greatest effect on chin prominence perceptions. CONCLUSIONS: More prominent lips, within normal limits, may be considered more attractive in the profile view. Profile parameters have a greater influence on their neighboring aesthetic units but indirectly influence related profile parameters, endorsing the importance of achieving an aesthetic balance between relative prominences of all aesthetic units of the facial profile.